The mold videos and mould videos is about Huangyan yichuan mold factory in China.
    Send Mail To Us:sales@capmold.com
Set Home
Collection
Chinese
ABOUT US
MOLD WORKSHOP
PLASTIC MOLD
MOLD DESIGN
MOLD VIDEOS
NEW MOLD
FAIRS
MOLD FAQ
CONTACT US
SITE MAP
  Cap Mold Pet Preform Mold Thin Wall Mold Medical Mold Blowing Mold Hot Runner System  
     
thin wall mold video
1.thin-walled mold meal, a four.
2.the structure of the hot runner, fully automatic production.
3.very good water design, a 5 second cycle.
4.gas-assisted release, to enhance the speed of production.
5.nickel-plated mold, in line with food hygiene requirements.
6.left click to watch mold video.
thin wall mold video

thin wall mold video
1.thin-walled mold meal, a four.
2.the structure of the hot runner, fully automatic production.
3.very good water design, a 5 second cycle.
4.gas-assisted release, to enhance the speed of production.
5.nickel-plated mold, in line with food hygiene requirements.
6.left click to watch mold video.
thin wall mold video

thin wall mold video
1.thin-walled mold meal, a four.
2.the structure of the hot runner, fully automatic production.
3.very good water design, a 5 second cycle.
4.gas-assisted release, to enhance the speed of production.
5.nickel-plated mold, in line with food hygiene requirements.
6.left click to watch mold video.
thin wall mold video

thin wall mold video
1.thin-walled mold meal, a four.
2.the structure of the hot runner, fully automatic production.
3.very good water design, a 5 second cycle.
4.gas-assisted release, to enhance the speed of production.
5.nickel-plated mold, in line with food hygiene requirements.
6.left click to watch mold video.
thin wall mold video

thin wall mold video
1.thin-walled mold meal, a four.
2.the structure of the hot runner, fully automatic production.
3.very good water design, a 5 second cycle.
4.gas-assisted release, to enhance the speed of production.
5.nickel-plated mold, in line with food hygiene requirements.
6.left click to watch mold video.
thin wall mold video

thin wall mold video
1.thin-walled mold meal, a four.
2.the structure of the hot runner, fully automatic production.
3.very good water design, a 5 second cycle.
4.gas-assisted release, to enhance the speed of production.
5.nickel-plated mold, in line with food hygiene requirements.
6.left click to watch mold video.
thin wall mold video

thin wall mold video
1.thin-walled mold meal, a four.
2.the structure of the hot runner, fully automatic production.
3.very good water design, a 5 second cycle.
4.gas-assisted release, to enhance the speed of production.
5.nickel-plated mold, in line with food hygiene requirements.
6.left click to watch mold video.

cap mold video
1.Hot Runner Dies clever cover, a 4.
2.16 seconds of a cycle, fully automatic production.
3.a top gas-assisted, is very mature and die design.
4.Every year, we have dozens of pieces of molds build smart 5 gallons sold around the world.
5.left click to watch mold vedio.

lid mold video
1.Hot Runner Dies clever cover, a 12.
2.16 seconds of a cycle, fully automatic production.
3.a top gas-assisted, is very mature and die design.
4.Every year, we have dozens of pieces of molds build smart 5 gallons sold around the world.
5.left click to watch mold vedio.
mold test vedio

hot runner system video
1.flip cap mold, an eight.
2.cold Road structure, fully automated production.
3.12 seconds of a cycle.
4.we flip the production, flexible. Have a clear opening and closing of the sound.
5.left click to watch mold vedio.
mold test vedio

plastic mold video
1.thin-walled mold meal, a four.
2.the structure of the hot runner, fully automatic production.
3.very good water design, a 5 second cycle.
4.gas-assisted release, to enhance the speed of production.
5.nickel-plated mold, in line with food hygiene requirements.
6.left click to watch mold vedio.
mold test vedio

medical mold video
1.Hot Runner Dies ragay machine oiler, an 8.
2.fully automated production, a cycle of 12 seconds. Automated production.
3.and the board pushed up the tube top, very mature mold design.
4.left click to watch mold vedio.
mold test vedio

mold design video
1.8, a flip cap mold.
2.the core thread rotary pump.
3.the structure of semi-hot runner.
4.fully automated production, rapid co-cylinder cover.
5.left click to watch mold vedio.
mold test vedio

preform mold video
1.16, a lid mold.
2.the structure of the hot runner, fully automatic production.
3.12 seconds of a cycle.
4.nickel-plated mold, the co-payment of food hygiene requirements.
5.left click to watch mold vedio.
mold test vedio

blowing mold video
1.cup thin-walled mold, and a four.
2.the structure of the hot runner, fully automatic production.
3.the positioning cone, a 5 second cycle.
4.gas-assisted release, to enhance the speed of production.
5.corrosion-resistant stainless steel materials, environmental protection and health.
5.left click to watch mold vedio.
mold test vedio

injection mold video
1.thin-walled mold meal, a four.
2.the structure of the hot runner, fully automatic production.
3.stacked die, a 5 second cycle.
4.gas-assisted release, to enhance the speed of production.
5.left click to watch mold vedio.
mold test vedio
     
Huangyan Yichuan Mold Factory Copyright 2008-2010 www.capmold.com All Rights Reserved. Design By:ChuangShi
 
Portuguese
Japanese
German
Arabic
Spanish
Russian
French