high mold availability.
    Send Mail To Us:sales@capmold.com
Set Home
Collection
Chinese
what is PET what is PET what is PET what is PET what is PET what is PET
ABOUT US
MOLD WORKSHOP
PLASTIC MOLD
MOLD DESIGN
MOLD VIDEOS
MOLD FAQ
REQUEST INFO
CONTACT US
SITE MAP
  Cap Mold Pet Preform Mold Thin Wall Mold Blowing Mold Hot Runner System  
 

Vinyl / Polyvinyl Chloride (PVC)

 
 


   PVC is naturally clear, has extremely good resistance to oils and very low oxygen transmission. It provides an excellent barrier to most gases, but is vulnerable to solvents.

   PVC is a semi-rigid material which, when produced on extrusion blow-molding equipment, can accommodate handled designs. Improvements in resin formulation have increased oxygen barrier properties and chemical resistance, with a 20-30% improvement in drop impact resistance.

   PVC exhibits low temperature resistance and will distort at 160?F. It is not compatible with hot filled products. Because it provides a good oxygen barrier, PVC is an excellent choice for salad oil, mineral oil, and vinegar. It is also commonly used for shampoos and cosmetic products.

 
     
Huangyan Yichuan Mold Factory Copyright 2008-2020 www.capmold.com All Rights Reserved. Design By:ChuangShi
 
Portuguese
Japanese
German
Arabic
Spanish
Russian
French